Tile Leveling Clips Kit LEVEL SYSTEM T-HOLD 2mm, 1000pcs

Tile Leveling Clips Kit LEVEL SYSTEM T-HOLD 2mm, 1000pcs SIXTOL

The high-quality LEVEL SYSTEM T-HOLD 2mm tile leveling clips kit for leveling tiles. These clips are used in combination with leveling wedges and pliers during tile installation to ensure a level surface – insert spacers into the gaps according to the desired width, then insert the wedge into the spacer and use special leveling pliers to level the tiles. Once the adhesive under the tiles hardens, the spacers are broken off with a rubber mallet, the gaps are filled, and the job is done. Wedges, pliers, and a mallet are not included in this kit and must be purchased separately.

Main advantages:

• Easy, fast, and precise tile and flooring installation
• Eliminates height differences between tiles, known as lippage
• Suitable for tiles of all materials and shapes

Usage:

• 1. During installation, insert spacers into the gaps between tiles according to the desired gap width.
• 2. Insert wedges into all spacers.
• 3. Using leveling pliers, tighten the first wedge into the spacer until the tiles are level.
• 4. Adjust the pliers screw according to the first wedge to ensure even tension for the rest of the tiles.
• 5. Tighten the remaining wedges.
• 6. After the adhesive hardens (usually after 24 hours), remove the spacers by striking them with the rubber mallet along the direction of the gap.
• Note: Wedges can be reused.
• Note: Ensure the gap is clean for proper spacer removal with the mallet.

Package contents:

• 1000 x Tile leveling clips 2 mm

Technical parameters:

• Thickness: 2 mm
• Width: 36 mm
• Height: 40 mm
• Material: plastic
• For tile thickness: 4 - 15 mm