Tile Leveling System Starter Kit LEVEL SYSTEM STARTER 1

Practical tool set for tile leveling SIXTOL LEVEL SYSTEM STARTER 1 with 100 leveling wedges, pliers, and a rubber mallet.

Full description

Description and parameters
Videos and images
Questions

Tile Leveling System Starter Kit LEVEL SYSTEM STARTER 1 SIXTOL

The high-quality LEVEL SYSTEM STARTER 1 kit for tile leveling consists of 100 leveling wedges, pliers, and a rubber mallet. Laying tiles level is easy with the LEVEL SYSTEM kit - you insert spacers into the gaps according to the required width, insert wedges into the spacers, and use the special leveling pliers to level the tiles. Once the adhesive under the tiles hardens, break off the spacers with the rubber mallet, fill the gaps, and you're done. Spacers are not included in the kit and must be purchased according to the desired gap width.

Main advantages:

Easy, fast, and precise tile laying
Eliminates height differences between tiles, known as lippage
Suitable for tiles of all materials and shapes
Wedges can be reused
The white rubber mallet head leaves no marks

Usage:

1. During installation, insert spacers into the gaps between tiles according to the desired gap width.
2. Insert wedges into all spacers.
3. Using the leveling pliers, tighten the first wedge into the spacer until the tiles are level.
4. Adjust the leveling pliers screw according to the first wedge to ensure equal tension for the rest of the tiles.
5. Tighten the remaining wedges.
6. After the adhesive hardens (usually after 24 hours), remove the spacers by striking them with the rubber mallet along the direction of the gap.
Note: Wedges can be reused.
Note: Ensure the gap is clean for proper spacer removal with the mallet.

Package contents: